1. All 3M Products
3M Egypt

3M™ Glass Cloth Tape 398FR White 101.6 mm x 32.91 m

3M ID 70006351558
  • Abrasion resistance and good temperature resistance helps reduce failure due to wear
  • Acrylic adhesive provides excellent long-aging properties ideal for many permanent applications
  • Available on a skip-slit liner for ease of application
  • Meets flame retardant specifications of F.A.R. 25.853(a)‎ and F.A.R. 25.855(d)‎ and is EU Compliant
 More
Specifications
Adhesive Type
Acrylic
Backing Material
Glass cloth
Backing Thickness (metric)
0.13 mm
Back-Side Adhesive Thickness (metric)
0.05 mm
Brand
3M™
Core Material
Paper
Core Size (metric)
7.62 cm
Elongation at Break
7 Percent
Flame Retardant
Yes
Indoor/Outdoor
Both
Industries
Aerospace, Automotive, Construction, General Industrial, Military and Government, Specialty Vehicle, Transportation
Maximum Operating Temperature (Celsius)
121 Degree Celsius
Product Form
Roll
Shelf Life
24 Month
Tensile Strength (metric)
38 N/100mm
Total Tape Thickness without Liner (metric)
0.18 mm
Units per Case
8
Details
  • Abrasion resistance and good temperature resistance helps reduce failure due to wear
  • Acrylic adhesive provides excellent long-aging properties ideal for many permanent applications
  • Available on a skip-slit liner for ease of application
  • Meets flame retardant specifications of F.A.R. 25.853(a)‎ and F.A.R. 25.855(d)‎ and is EU Compliant
  • High conformability to bond over a variety of difficult textures and uneven or curved surfaces
  • Formulation does not contain antimony
  • Offers good temperature resistance of -20ºF/-29ºC to 250ºF/121ºC
  • Meets requirements of and can be qualified to Boeing material specifications BMS 5-146 Type I, Class I, Grade A

Our 3M™ Glass Cloth Tape 398FR has an acrylic adhesive for many applications requiring high adhesion, an abrasion-resistant backing and flame retardant properties.

Permanently Seal and Protect
Our 3M™ Glass Cloth Tape 398FR features a white glass-cloth backing designed to provide a clean finished appearance. This tape features a pressure sensitive, acrylic adhesive that adheres to a variety of substrates. It is available on a skip-slit liner for ease of application. Once bonded, this adhesive provides high, secure adhesion for extended periods in a wide range of climate and temperature conditions, including temperatures as high as 250°F/121°C. A blue polyethylene film liner assists with ease of application. This tape features good puncture resistance, high tensile strength and superior abrasion resistance.

3M™ Glass Cloth Tape 398FR meets the flame retardant specifications of F.A.R. Part 25.853(a), F.A.R. Part 25.855(d) and MIL A-3316C 3 13.1 and 3 13.2. It is EU compliant per directive 2003/11/EC of the European Parliament and the Council of February 6, 2003 amending Council Directive 76/769/EEC which restricts the use of penta-BDE and octa-BDE flame retardants. This tape meets requirements of and can be qualified to Boeing material specifications BMS 5-146 Type I, Class I, Grade A.

Recommended Applications

  • Sealing thermal and acoustic insulation panels where high adhesion and flame retardancy are needed
  • Aircraft window sealing, duct sealing and seat repair
  • Protection of wire harnesses, electrical cables or hoses from temperature extremes and abrasion

 

Other 3M Sites:
Where to Buy (PDF, 334kb)
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Egypt - English