1. All 3M Products
3M Egypt

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H

3M ID YP208011715
  • Yellow, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Medium soft
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Composite Sleeves
Yes
Overall Length (Metric)
23 m
Overall Width (Metric)
457 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Total Tape Thickness without Liner (metric)
0.51 mm
Urethane Sleeves
Yes
Product Details
  • Yellow, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Medium soft
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Print plates mounted on E1320H will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H. Our 0.51 mm yellow, double coated foam tape has the air release feature with high plate side adhesion. It is used for high speed printing of combination work when halftone areas exceed solids.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for high speed printing of combination work when halftone areas exceed solids. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Other 3M Sites:
Where to Buy (PDF, 175kb)
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Egypt - English